Versatility, Variety
and Quality. . .
Choose from 14 prepackaged kits. By utilizing our component XT corral panel, stall panel, 12' open support brace, shelter package and roof connector, the sky's the limit!
 |
.... |
 |
12' XT Corral Panel
Item no. 44131127
12' long, 6' high, 16/18 ga. 2" dia. tubing, chain hookups included. |
|
12' XT Entrance Panel
12' long, 6' high with 6' x 7' gate, used for front (or back, or both) of XT pen |
Shelter Framing Package
Item No. 76110678
Basic roof framing for one pen or stall, includes (12' x 15' w/front overhand) connectors to hold the stall or XT pen sides together,beams, purlins, uprights, butterfly clamps, nuts & bolts. |
|
Shelter Framing Package Add-on
Item No. 76110708
For second unit, bolts to Shelter Framing Package, uses common beam. Includes beams, purlins, uprights, butterfly clamps, nuts and bolts.
NOTE: In a row of shelters, you would buy one Shelter Framing Package (76110678) and from that point on, you would buy all Add-ons (76110708). If you placed two shelters facing each other with a breezeway between them, you would have to buy 2 Shelter Framing Packages and two 6' Center Roof Connectors. |
|
| |
|
6' Center Connector - Item No. 76110688
This item makes a 6' piece that joins two shelters which are set up facing each other with a 12' breezeway in between. For a pair of shelters, you would buy two 6' Center Connectors. For each additional pair you would buy one more.
Six foot Center Connectors are not used unless you are setting up pairs of shelters facing each other with a breezeway between them. |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2" Butterfly Clamps - Item No. 44900067
One package contains 2 complete clamps with bolts & nuts. The Shelter Package comes with clamps. However, if you wish to attach an XT pen to your shelter, you may use the chain hookups, which are standard, or the optional butterflies which offer a more secure connection. Each connection requires a pair of clamps (one package).
*When ordered as an individual component, 4 pair (2 pkgs.) of butterfly clamps must be ordered separately.
|
Complete clamp shown |
|
|
|
|
 |
..... |
 |
12' Open Support Brace
Item No. 76110697
If you leave the front or the back of a pen or a stall open, you must use a 12' Open Support Brace to hold the sides securely. |
|
12' Stall Front
Item No. 76110287
12' wide, 7' high, sliding door, feed door, (feeder optional), 4' of wood on bottom, solid steel vertical bars on top. |
| |
|
|
 Wood not included |
|
 Wood not included |
12' Stall Panel w/bars
Item No. 76110297
12' wide, 7' high, 4' of wood on bottom, solid steel vertical bars on top, used to allow air flow or visibility. |
|
12' Stall Panel, Solid
Item No. 76110257
12' wide, 7' high, metal frame with 4' of wood on bottom, 3' of wood on top, used to make wind break, lower visibility. |
| |
|
|
 |
|
 |
Horse Gate Latch
Item No. 44112207
Very simple, low-cost, bolt-on latch for XT entrance panel, or any other 1 5/8" or 2" Behlen gate. |
|
Anchor Kit
Item No. 76110667
All Shelters should be anchored in undisturbed soil. Each package contains 4 anchors and chain. |
|
|
| |
|
